1. Not getting the surface ready
One of the worst things you can do is put marble on a surface that isn’t level or clean. To stick together, marble tiles need a base that is flat, stable, and clean. The marble can move, crack, or look out of place if there is dust, old glue, or uneven layers left behind. Before starting the job, professional installers always make sure the surface is ready.
2. Using the wrong glue
Not every glue works well with marble. Using the wrong kind can make things look bad or not stick together well. For instance, gray materials in cement-based glues can get into white marble and leave stains. That’s why professionals in jasa pasang marmer usually use special white thin-set mortar or epoxy adhesives to get a clean, strong result.
3. Not paying attention to the dry layout
There are natural veins and patterns in marble that need to be arranged carefully. If you don’t do a dry layout (putting the tiles down without glue first), the patterns may not match up, which will ruin the whole look. Before laying the tiles, professionals spend time arranging them so that the veins flow naturally, making a beautiful and seamless design.
4. Wrong Ways to Cut
If you cut marble the wrong way, it can chip or crack easily. A common mistake is to use the wrong tools, like a regular tile cutter, instead of a wet saw with a diamond blade. This often leads to rough edges and wasted materials. Installers who know what they’re doing always use the right tools to make clean, precise cuts.
5. Not Keeping the Right Gaps
Some people put marble tiles too close together because they think it will look better that way. In reality, not leaving a gap for grout causes problems like cracking and water getting in. On the other hand, leaving gaps that are too big makes the surface look bad. With the right spacers, skilled jasa pasang marmer make sure the grout lines are right for both looks and strength.
6. Not leveling well
When the tiles are polished, even a small unevenness in the marble installation becomes clear. Sadly, a lot of beginners don’t check for level while they are putting things together. Professional installers always use spirit levels or laser levels to make sure the floor is perfectly level.
7. Not sealing and polishing
Marble has holes in it that let liquids in easily. It will stain and lose its shine quickly if you don’t seal it right. Not polishing after installation is another common mistake. To keep marble looking its best, it needs to be cleaned and cared for on a regular basis by a professional jasa poles marmer. Marble floors can look dull and worn out in just a few years if you don’t do this.
8. Putting it in too quickly
You need to be patient when installing marble. If you rush the process, whether it’s curing the adhesive, grouting, or polishing, you could have problems for a long time. When you rush, you often get uneven joints, weak bonds, and surfaces that lose their beauty faster.
Why hire experts?
Installing marble may seem easy, but it requires a lot of technical knowledge. Not only do professional jasa pasang marmer have the right tools, but they also know how to avoid these common mistakes. Their knowledge of proper planning, handling, sealing, and final polishing makes sure that the marble looks great and lasts for decades.
In the same way, jasa poles marmer are important for long-term care. Even the best installation will need to be polished at some point to get rid of scratches and bring back the shine. Professional care on a regular basis keeps marble surfaces looking as good as they did when they were first put in.